|
Технические характеристики VigorSwitch P2260
|
| Interface |
24 x 10/100Mbps Ports, RJ-45 |
| 2 x SFP/ Gigabit Dual-media Ports |
| 1 x Console Port |
| 1 x Restart Button |
| 1 x Ledset Button |
| Standard Compliance |
IEEE 802.3 10Based-T Ethernet |
| IEEE 802.3u 100Based-TX Ethernet |
| IEEE 802.3ab 1000Based-TX Ethernet |
| IEEE 802.3z 1000Based-TX/FX Ethernet |
| IEEE 802.3x Flow Control Capability |
| IEEE 802.1q VLAN |
| IEEE 802.1p QoS |
| Performance |
Switching Capacity |
24 Fast Ethernet Ports+2 Gigabit Ethernet Port with Non-blocking Wise Speed Performance |
| 8K MAC Address |
| 256K Packet Buffer and 128K Control Memory |
| Multicast / Broadband / Unknown-unicat Storm Suppression |
| Port Mirroring |
| VLAN |
Port-base VLAN |
| IEEE 802.1q Tag-base VLAN, Maximum 4K, up to 256 Active VLANs |
| Q-in-Q is an Efficient Method for Enabling Subscriber Aggregation |
| VSM |
Up to 16 Switches Can be Managed via Single IP |
| Virtual Stacking, No Extra Stacking Hardware and Physical Central Wiring Closet are Needed |
| QoS |
Port Based, 802.1p, TOS and Diffserv Based QoS Packet Classification |
| Supports 4 Level Priority Queues to Prioritize In-bound and Out-bound Traffic |
| Supports Two Scheduling, WRR and Strict |
| Supports Priority in a Q-in-Q Tag |
| Isolated Group |
Provide One Group Allows Certain Ports to be Designated as Protected |
| Ingress / Egress Rate Limite |
1~24 Ports : 1K up to 100Mbps |
| 25, 26 Ports : 1K up to 1000Mbps |
| Protocol |
LACP |
2 Fast Ethernet +1 Gigabit Ethernet Groups |
| Per-group max 4 Member |
| Provides DA, SA and DA+SA MAC-based trunking with automatic link fail-over |
| GVRP / GARP |
IEEE 802.1q with GVRP / GARP |
| Multicasting |
Supports IGMP Snooping Including Active and Passive Modes |
| STP / RSTP |
IEEE 802.1d / IEEE 802.1w |
| Network Security |
IEEE 802.1x Access Control |
| Isolated Group |
| Restricate Group |
| Management Access Policy Control |
| SNMPv1, v2C Network Management |
RFC 1213 MIB (MIB-II) |
Interface MIB |
| Address Translation MIB |
| IP MIB |
| ICMP MIB |
| TCP MIB |
| UDP MIB |
| SNMP MIB |
| RFC 1757 RMON MIB |
Statistics Group 1 |
| History Group 2 |
| Alarm Group 3 |
| Event Group 9 |
| RFC 1493 Bridge MIB |
| RFC 1643 Ethernet MIB |
| Enterprise MIB |
| POE Specification |
24-ports IEEE802.3af POE PSE |
| Endpoint with 48VDC Power through RJ-45 pin 1,2,3,6 |
| POE Activity LED Indicator |
| 185 Watts of Total Power (up to 15.4 Watts per 10/100 Port) |
| Auto Detect Powered Device and Consumption Levels |
| Supports per Port Power Consumption Monitoring |
| Smart Feature for PD on/off, PD Detection, Power Level, PD status and Power feeding Priority |
| Circuit Protection to Prevent Power Interference between Ports |
| Supports per Port POE State Setting |
| Supports per Port Power priority Setting |
| Operation Voltage |
100-240 V |
| Consumption |
12W |
| Weight |
3.3Kg |
| Dimensions |
209 x 442 x 44 mm |
| Warranty |
1 Year Limited |
